PLANET preklopnik (Switch) 10" 8-port 10/100TX 802.3at PoE + 2-port 10/100TX, rack-mountable

Key Features PHYSICAL PORT - 10-port 10/100BASE-TX Fast Ethernet RJ45 copper - 8-port IEEE 802.3at PoE+ Injector (Port-1 to Port-8) POWER OVER ETHERNET - Complies with IEEE 802.3at Power+ over Ethernet end-span PSE - Up to 8 ports of IEEE 802.3af/802.3at devices powered - Supports PoE power up to 30.8 watts for each PoE port - Each port supports 55V DC power to PoE powered device - 120-watt PoE budget - Auto detects powered device (PD) - Circuit protection prevents power interference between ports - Remote power feeding up to 100m in standard mode with 250m in extend mode SWITCHING - Hardware-based 10/100Mbps auto-negotiation and auto MDI/MDI-X - Flow control for full duplex operation and back pressure for half duplex operation - IEEE 802.1Q VLAN transparency - Hardware DIP switch for Standard, VLAN and Extend mode selection; the Extend mode features 30-watt PoE transmit distance of 250m at speed of 10Mbps and VLAN isolation (Only for Port-1 to Port-8) - Solid DIP switch to isolate ports to prevent broadcast storm and defend DHCP spoofing HARDWARE - 9-inch desktop size, 1U height, rack mountable - LED indicators for system power, per port PoE ready and PoE activity, speed, Link/Act - Fanless design - Supports Energy-Efficient Ethernet (EEE) function (IEEE 802.3az) Hardware Specifications - Copper Port: 10× 10/100BASE-TX MDI/MDIX Ports - PoE Injector Port: 8-port with 802.3at/af PoE injector function with Port-1 to Port-8 - Switch Architecture: Store-and-Forward - Switch Fabric: 2Gbps/non-blocking - Switch Throughput@64 bytes: 1.48Mpps@64 bytes - MAC Address Table: 8K entries, automatic source address learning and aging - Maximum Frame Size: 1522 bytes - Flow Control: * IEEE 802.3x pause frame for full-duplex * Back pressure for half-duplex - LED: * System: Power (Green) * 10/100BASE-TX RJ45 interfaces: 10/100Mbps LNK/ACT (Green) * PoE interfaces: PoE-in-Use (Orange) - DIP Switch: Selectable operation mode (Standard, VLAN, Extend) - Dimensions (W×D×H): 220×150×43 mm (1U height) - Enclosure: Metal - Weight: 1230 g - Power Requirements: AC 100-240V, 50/60Hz, 2.5A max. - Power Consumption/ Dissipation: * System On: Max. 2.4 watts/8.1 BTU * Ethernet Full Loading: Max. 5 watts/10.2 BTU * PoE Full Loading: Max. 129 watts/440.1 BTU - ESD Protection: * Contact discharge of 4KV DC * Air discharge of 6KV DC - Thermal Fan: Fanless Power over Ethernet - PoE Standard: * IEEE 802.3af Power over Ethernet/PSE * IEEE 802.3at Power over Ethernet Plus/PSE - PoE Power Supply Type: End-span - PoE Power Output: Per port 55V DC, 540mA. max. 30 watts - Power Pin Assignment: 1/2(+), 3/6(-) - PoE Power Budget: 120 watts - Max. Number of Class 2 PDs: 8 - Max. Number of Class 3 PDs: 8 - Max. Number of Class 4 PDs: 4 Standards Conformance - Regulatory Compliance: FCC Part 15 Class A, CE - Standards Compliance: * IEEE 802.3 10BASE-T * IEEE 802.3u 100BASE-TX * IEEE 802.3x Flow control and back pressure * IEEE 802.3af Power over Ethernet * IEEE 802.3at Power over Ethernet Plus * IEEE 802.3az Energy Efficient Ethernet (EEE) Environment - Operating: * Temperature: 0C - 50 degrees C * Relative Humidity: 5% - 95% (non-condensing) - Storage: * Temperature: -10C - 70 degrees C * Relative Humidity: 5% - 95% (non-condensing)